Jaguar Touch Screen Display JJM 18 42 26 701 - Manual (Page 65)

65
Route Setting
R
Route Setting
Setting a Route
This is a simple example showing how to
use the basic features of the system to set
a route. It describes each screen in turn
and explains how to use the controls. For
information relating to the other features
of the system, see the relevant chapter in
this handbook.
Note: Before using the system, check that
the correct Navigation System DVD is
loaded, see ‘Loading the Navigation
DVD’, page 51.
Selecting the System
Note: The ignition must be switched on
(position ‘I’)
To select the navigation system (if
necessary), push the NAV button on the
perimeter of the touch-screen panel. The
road safety caution will be displayed. To
use the system, read the caution and
touch Agree.
Map Display
The initial map screen showing the
current vehicle position is displayed.
• Touch Nav Menu to select the
Navigation Menu.
Navigation Menu
The Navigation menu is the top level
menu of the system, and shows the main
functions that are available.
• Touch Destination Entry to select the
Destination Entry menu.