Jaguar Touch Screen Display JJM 18 42 26 701 - Manual (Page 33)

33
Cassette Tape
R
Cassette Player Operation
In TAPE mode, touch-screen buttons
(shown above) provide for selection of
cassette tape track, Dolby and change
sides.
The display will show the cassette screen
and indicate SIDE 1. The cassette symbol
will be displayed until the tape is ejected,
regardless of the selected audio source.
When loaded, a tape immediately plays
and after playing one side, auto-reverses
and plays the other. Equalisation of
non-ferric tapes is automatically adjusted.
Eject
Press to eject the cassette.
TAPE button
If you are playing the radio or CD
changer, pressing TAPE will play
any cassette in the player.
This function can also be controlled by a
button on the steering wheel
(see page 31).
Dolby B
When using a cassette with a
‘Dolby’ recording, the noise
reduction system can be
selected by pressing the DOLBY button.
DOLBY will be displayed to indicate the
system is active.
Dolby noise reduction system is
manufactured under licence from Dolby
Laboratories Licensing Corporation.
‘Dolby’ and the double-D symbol are
trademarks of Dolby Licensing Corp.
Changing tape side
Touch and release to change
to other side of cassette tape.
This function can also be
controlled by a button on the steering
wheel (see page 31) or the TAPE button.
Fast forward and rewind
These controls have two
functions, to seek a track,
and tape fast forward or
rewind. Momentarily pressing the
right-hand button will locate the
beginning of the next track. Similarly
pressing the left-hand button, will return
to the beginning of the current track.
Pressing and holding the appropriate
button for 2 seconds will activate
continuous fast forward or rewind of the
tape. This can be cancelled by pressing
either button again.