Jaguar Touch Screen Display JJM 18 42 26 701 - Manual (Page 11)

11
Quick Overview
R
JaguarVoice
Press and release the steering wheel
voice button (A), wait for the end of the
beep and say: ‘Voice Help’.
• The voice system will then give you a
list of the help menus available.
• To cancel the dialogue, press and
release the voice button.
• If you hear a double beep when you
give a command, press the voice
button and try again.
Next - try some commands
• Press and release the voice button
before each command, and try the
following:
‘Radio Tune 97.4 FM’
‘Changer Play Track 4’
‘Climate Control Temperature 21’
‘Phone On’
Operating tips
1. After pressing the voice button (A),
wait for the end of the single listening
beep before giving the command.
A single beep denotes when the voice
system is listening for a command. A
double beep denotes when the
system has stopped listening, due to
an error or when an incorrect
command has been given.
‘LISTENING’ will be displayed on the
message centre in the instrument
pack.
2. Face forward and speak naturally, as
if you were talking to a passenger or
on the phone.
3. Note the structure of the commands;
remember this rather than trying to
remember all the commands.
The voice system will repeat the
command back to you and display it on
the message centre in the instrument
pack. The command will then be
performed.
See a list of useful commands on the next
page. Have a go!
Device Function Setting
Radio Tune 97.4