Route guidance – Jaguar Touch Screen Display JJM 18 42 26 701 User Manual

Page 98

Advertising
background image

Route Guidance

98

L

Route Guidance

Following Guidance

!

WARNING:

Only operate, adjust or view the system
when it is safe to do so.

After touching Start, the initial map
screen while under guidance is displayed.
The route is shown highlighted, with the
current road name shown in the text area
at the bottom of the screen.

Drive away, following the voice guidance
given by the system. Continue to follow
the voice guidance until the end of the
route is reached.

The touch-screen buttons, types of
guidance screen and other guidance
features are described in the following
pages.

Distance units

Distances are shown on the screen, and
given in voice guidance, either in miles or
in Metric units (kilometres and metres).
For information on changing the unit
selection, see ‘User settings’, page 19.

Time/distance to destination

While driving under guidance, the
estimated time (if selected) and distance
remaining to the end of the route are
shown on the screen.

While far-out – Before the vehicle
reaches the start of the highlighted route,
and during route recalculation, the
straight line distance and direction to the
destination are shown.

Message centre guidance

(where fitted)

Route guidance information can be
displayed on the instrument panel
message centre. The display of this
information on the message centre can be
selected or deselected as required, see
‘Guidance options:’, page 74.

Breaks in journey

While driving under guidance, the journey
can be broken without affecting the
stored route. When the journey is
continued, the route guidance will resume
automatically.

Whole route display

The map screen showing the entire route
can be displayed. This is selected from
the Route Options menu, see ‘Display
Whole Route’, page 70
. From this screen
the display of the last portion of the route
and the route turn list can be selected.

Avoiding points and areas

At any time while a route is set, you can
select a point to be avoided on the current
route. This can be enlarged into an avoid
area if required. When the route is
recalculated, the points or areas selected
will be avoided (where possible), see
‘Turn list’, page 70.

Advertising