Janome MEMORY CRAFT 9700 - Manual (Page 46)

44
Pull the Buttonhole Lever down as far as it will go.
1 Buttonhole lever
NOTE:
A warning message will appear and the machine will
stop automatically if you start to sew a buttonhole
without pulling down the buttonhole lever.
Press the Return key and pull down the buttonhole
lever to restart.
Insert the corner of the fabric under the foot. Press the
Up/Down Needle button twice. Remove the fabric to
the left to draw both threads under the foot. Place the
garment under the foot, and lower the needle at the
Starting Point of the Mark. Then lower the Automatic
Buttonhole Foot R.
2 Buttonhole Mark
3 Needle Thread
4 Bobbin Thread
5 Starting Point
NOTE:
Make sure there is no gap between the Slider and
Spring Holder, otherwise the left and right lengths will
be different.
6 Slider
7 Spring Holder
8 Sewing Gap
1
2
4
5
5
8
3
6
7
3
4
4
3
Pull down BH Lever.