Janome MEMORY CRAFT 9700 - Manual (Page 95)

93
Moving a pattern
To move the embroidery pattern on the editing screen,
press and drag the pattern to a desired location with
your fingertip.
NOTE:
Do not drag the pattern on the screen with a sharp
pointed object.
You can move the selected pattern also by pressing
the Layout keys.
Press the Layout Keys to move the pattern to the
desired position on the Edit screen.
The carriage will not move when you press the layout
keys since the pattern position will move relatively to
the hoop, not to the machine.
1 Layout Key
Selecting the hoop
In the editing window, you need to select the
appropriate size of the embroidery hoop by pressing
the hoop selection key.
There are 3 hoop size selections:
Standard Hoop A: 126 mm by 110 mm
Large Hoop B: 140 mm by 200 mm
Free Arm Hoop C: 50 mm by 50 mm
2 Hoop Selection Key
Select the desired hoop.
Press the OK key and the Editing window for the
selected hoop will appear.
3 OK Key
Press the Cancel key to return to the default
setting (Hoop B).
4 Cancel Key
5 Editing Screen for the Hoop A
SET
Edit
Size
A Z
Edit
SET SET
Cancel OK
A(F): 126x110mm
Cancel
Size
OK
SET
Edit
B: 140x200mm
A Z
Edit
SET SET
Cancel
Size
OK
SET
Edit
B: 140x200mm
A Z
Edit
SET SET
Cancel
Size
OK
1
2
C A(F)
Cancel OK
B: 140x200mm
C B
OK
Cancel
3
4
5