JVC KT-SR3000 - Manual (Page 14)

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
14
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Before you can listen to JVC PnP, you must subscribe
to SIRIUS Satellite Radio’s service.
1. Make sure that your JVC PnP is properly connected
and that the antenna is oriented to receive the
SIRIUS satellite signal (see Installation sections for
details).
2. Press (POWER) to turn on your JVC PnP.
After displaying the SIRIUS logo, JVC PnP
updates all Sirius channels. “UPDATING
CHANNELS” appears on the top line and “X%
Completed” (0%-20%-40%-60%-80%-100%)
appears on the bottom line as the updating goes on.
Note: Do not press any button or perform any
operation until updating has been completed.
Once all updated SIRIUS channels are received,
“Call 1-888-539-SIRIUS to Subscribe” appears on
the display and JVC PnP now tunes in to the
SIRIUS Satellite Radio’s Preview Channel (Ch184).
• You cannot tune in to any other channels until
you activate your SIRIUS subscription.
3. Press MENU to enter the Menu Options settings.
4. Press CH
5 (or CH + on the remote controller) or
CH
∞ (or CH –) until “Sirius ID” is highlighted,
then press SEL (or SELECT).
Now your unit’s unique 12-digit SIRIUS ID
Number appears on the display.
• This SIRIUS ID number is also printed on your
JVC PnP packaging.
• Write the number down and have your credit card
handy.
5. Contact SIRIUS on the Internet at
<http://activate.siriusradio.com/>.
• Follow the prompts to activate your subscription.
• You can also call SIRIUS toll-free at 1-888-539-
SIRIUS (7474).
Activating Your SIRIUS Subscription
KT_SR3000_02_14.p65 05.8.22, 2:07 PM 14