English, Turning on the power – JVC UX-A10DVD User Manual

Page 22

Advertising
background image

19

English

To turn off the unit automatically (Auto Power Off)

Using the Auto Power Off function, the unit automatically
turns itself off if no sound comes in for more than 3
minutes except when FM or AM is selected as the source.
If an operation is done during this 3-minute period, Auto
Power Off is canceled temporarily even though no sound
comes in.
• You can also turn off the unit automatically by using the

sleep timer. (See page 92.)

On the remote control ONLY:

To activate Auto Power Off, press A.P.OFF while holding
down SHIFT.
The A.P.off (Auto Power off) indicator lights up on the
display.
• When no sound comes in, the A.P.off indicator starts

flashing on the display. About 20 seconds before the unit
turns itself off, “AUTO POWER OFF” starts flashing in
the main display.

To deactivate Auto Power Off, press A.P.OFF while
holding down SHIFT.
The A.P.off indicator goes off.

Turning On the Power

When you press one of the source selecting buttons, the
unit automatically turns on (and starts playback if the
source is ready).

On the remote control:

On the main unit

* Pressing DVD

0 or MD 0 also turns on the unit.

To turn on the unit without playing, press
STANDBY/ON

(or

on the main unit).

The STANDBY lamp on the main unit goes off.
“HELLO” appears in the main display.

To turn off the unit (on standby), press
STANDBY/ON

(or

on the main unit) again.

The STANDBY lamp on the main unit lights up.
“SEE YOU” appears in the main display.

• When you use the Resume function (see page 86),

turning off the power while playing a disc stops playback
and stores the stop point.
By pressing DVD SELECT

3 (or DVD #¥8 on the

main unit), you can turn on the unit and start playback
again from the position where you have stopped—
Resume play. (“RESUME” appears in the main display.)

• A little power is always consumed even while the unit is

in standby mode.

To switch off the power supply completely, unplug the
AC power cord from the AC outlet.

When you unplug the AC power cord or if a power
failure occurs

The settings you have done will be erased.

A.P.off indicator

FM/AM

/AUX

DVD

SELECT

TAPE

MD

DVD

MD

TAPE

FM/AM

AUX

*

*

EN18_23UX-A10DVD[UB].pm6

02.10.7, 8:09 AM

19

Advertising