JVC UX-A10DVD - Manual (Page 41)

38
English
To stop playing, press 7.
Playback stops, but the program play is still activated.
• To exit from the program play, see “To exit from the
program play” on the right column.
To go to the next steps, press ¢.
• You cannot go back to the previous steps by pressing
4.
If your entry is ignored
You have tried to program a title/track/group number that does not
exist on the disc (for example, selecting track 14 on a disc that
only has 12 tracks). Such entries are ignored.
If the total playing time exceeds 100 minutes
The total playing time in the main display will not be shown.
(“– – : – –” will appear.)
To check the programed contents
On the TV:
Press PLAY MODE. The programed contents appear on the
TV.
To erase the play mode screen, press PLAY MODE.
On the display:
Press
¢ or 4 while the program play is stopped.
•
¢: Shows the programed tracks in the programed
order.
•
4: Shows them in the reverse order.
To modify the program
You can modify the program before or after playing.
To show the program screen:
1 Press PLAY MODE while the program play is stopped.
The program screen appears on the TV.
• If you press the button during playback, the program
screen appears on the TV, but you cannot modify your
program.
2 Press Cursor 3/2 to move to “PROGRAM.”
Now you can modify your program.
To erase the last step, press CANCEL.
• Each time you press the button, the last programed step
is erased from the program.
To add steps in the program before play, simply select
the numbers you want to add by pressing the number
buttons.
To erase the entire program, press and hold CANCEL for
about 3 seconds.
• Ejecting the disc or turning off the unit also erase the
program.
To exit from the program play
When the program play is stopped, perform steps 3 and 4
on page 37 so that the program screen disappears from the
TV.
“PROGRAM OFF” appears in the main display and the
PRGM (program) indicator goes off.
To erase the play mode screen, press PLAY MODE.
• Each time you press ENTER in step 4, the program play
turns on and off.
• Ejecting the disc or turning off the unit will also cancel
the program play and erase the program.
EN27_39UX-A10DVD[UB].pm6 02.10.7, 8:09 AM 38