English playing at random—random play – JVC UX-A10DVD User Manual

Page 47

Advertising
background image

44

English

Playing at Random—Random Play

You can play MD’s contents in random order.
• You cannot perform the random play while the program

play (see page 43) or the group play (see page 45) is
activated.

On the remote control ONLY:

1

Load an MD.

2

Press MD

3/8, then 7.

The source is changed to “MD” and playback is
stopped.

3

Press PLAY MODE.
“REPEAT” (with its current setting) appears in the
main display.

4

Press Cursor

3/2 repeatedly so that “RANDOM”

(with its current setting) appears in the main
display.
• Each time you press the button, play mode changes

as follows:

5

Press ENTER to enter the random play.

• Each time you press the button, the random play

turns “ON” and “OFF.”

6

Press MD

3/8.

Playback starts in random order.
The random play ends when all the tracks are played once.

To skip the playing track, press

¢.

• You cannot go back to the previous tracks by pressing

4.

To stop playing, press

7.

“MD RANDOM” appears in the main display.

To exit from the random play

When the random play is stopped, perform steps 3 to 5 so
that “RANDOM OFF” appears in the main display and the
RANDOM indicator goes off.
To return to the normal display, press PLAY MODE.
• Ejecting the MD or turning off the unit will also cancel

the random play.

If your entry is ignored

You have tried to program a track that does not exist on the MD
(for example, selecting track 14 on an MD that only has 12 tracks).
Such entries are ignored.

I

f you try to program a 33rd step

“MEMORY FULL” will appear in the main display.

If the total playing time exceeds 150 minutes

The total playing time will not be shown. (“– – : – –” will appear.)

To check the program contents

Press

¢ or 4 while the program play is stopped.

¢: Shows the programed tracks in the programed order.

4: Shows them in the reverse order.

To modify the program

You can modify the program before or after playing.

1 Press PLAY MODE while the program play is stopped.

“REPEAT” appears in the main display.

2 Press Cursor

3/2 so that “PROGRAM” appears in the

main display.
“PROGRAM” turns into the program entry display after
a few seconds.
Now you can modify your program.

To erase the last step, press CANCEL.
• Each time you press the button, the last programed step

is erased from the program.

To add steps in the program before play, simply select
the track numbers you want to add by pressing the number
buttons.

To erase the entire program, press and hold CANCEL for
about 3 seconds.
• Ejecting the MD or turning off the unit also erase the

program.

To exit from the program play

When the program play is stopped, perform steps 3 to 5 on
page 43 so that “PROGRAM OFF” appears in the main
display and the PRGM (program) indicator goes off.
To return to the normal display, press PLAY MODE.
• Each time you press ENTER in step 5, the program play

turns on and off.

• Ejecting the MD or turning off the unit will also cancel

the program play and erase the program.

PROGRAM

RANDOM

GROUP

REPEAT

Normal play

RANDOM indicator lights up.

EN40_46UX-A10DVD[UB].pm6

02.10.7, 8:10 AM

44

Advertising