JVC UX-A10DVD - Manual (Page 67)

64
English
When recording on an MD and a tape at the same
time
A 4-second blank before each track is not made on the tape.
When recording from some DVDs which have its
menu
Playback may not go further from the point where the menu is
shown. (You cannot select any item on the menu during recording.)
In such a case, stop the recording and select the point where you
want to start recording. (See page 60.)
To record a single track during play or pause
Available for:
SVCD SVCD VCD VCD Anduio CD Audio CD
• You can do this operation for SVCD or VCD only
without the PBC function.
On the main unit ONLY:
While playing back or pausing a track you want to
record, press MD&TAPE REC.
The playback of the track is stopped, and the same track starts
playing from the beginning again. This time, the MD recorder
and cassette deck start recording the track.
• After the track is recorded, both playback and recording
stop automatically.
If you do the above operation for a DVD or an MP3
disc
Recording starts from the point where you press the button and
does not stop after the current chapter or track is recorded.
(Playback also continues.)
Recording a Disc onto an MD and a Tape
—Disc Synchronized Recording
Available for:
DVD DVD SVCD SVCD VCD VCD Anduio CD Audio CD MP3 MP3
Using the disc synchronized recording method, you can
start and stop disc play, MD and tape recordings at the
same time.
1
Prepare a disc.
After placing a disc, press DVD
#/8 (or DVD
SELECT
3 on the remote control), then 7 before
going to the next step.
• You can create a program (see page 37) or select the
random play mode (see page 39) as you wish.
2
Insert a recordable MD into the MD loading slot and
put a recordable cassette into the cassette holder.
For the MD:
Set the MD recording length mode, “LP:”-prefix
addition mode, and the group recording mode. (See
“Setting MD Recording Modes” on page 59.)
For the tape:
Press REV. MODE to select the reverse mode (
).
(See page 63.)
3
Press MD&TAPE REC on the main unit.
Recording start and the MD REC and REC indicators
start flashing on the display.
After recording, the DVD player, the MD recorder and
the cassette deck stop automatically.
To stop recording, press 7.
“WRITING” flashes in the main display for a while.
MD and tape recording indicators
EN56_64UX-A10DVD[UB].pm6 02.10.7, 8:11 AM 64