JVC UX-A10DVD - Manual (Page 71)

68
English
Forming a Group—FORM GR
This function allows you to form a group from a series of
tracks which do not belong to other groups. You can form a
group with a single track.
Once a new group is formed, the other groups are
renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during the editing process before step 8,
press MD GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very beginning—that is, inserting a disc. You can also edit
an MD during playback (in normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press MD GROUP TITLE/EDIT repeatedly until
“FORM GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
Track Nos. to form a new group
• During playback:
The currently playing track number starts flashing.
4
Press ¢ or 4 to select the first track of a new
group you will make.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
5
Press SET.
• If the track selected belongs to another group,
“GROUP TRACK” appears in the main display.
Select a track which do not belong to another group
in step 4 again.
• If you want to form a group with the selected track
only, go to step 7.
• To cancel the setting, press CANCEL, then repeat
from step 4.
6
Press ¢ or 4 to select the last track of the new
group.
• You can select the track using the number buttons. In
this case, the selected track starts playback
repeatedly.
7
Press SET.
• If the track selected belongs to another group,
“GROUP TRACK” appears in the main display.
Select a track which do not belong to another group
in step 6 again.
• To cancel the setting, press CANCEL, then repeat
from step 4.
8
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flashes
while the changes you have made are recorded on the
MD.
To dissolve the group again, see the UNGROUP function
on page 73.
When “CANNOT FORM!” appears in step 7
You are trying to form a new group which includes another group
between the first and the last track. In this case, dissolve the
previous group and form a new one again.
Ex.: When track 3 is selected.
Ex.: When track 5 is selected.
EN65_74UX-A10DVD[UB].pm6 02.10.7, 8:11 AM 68