JVC UX-A10DVD - Manual (Page 88)

85
English
Changing the Initial Language Settings
On the LANGUAGE menu, you can select the following
initial languages.
• MENU LANGUAGE:
Select the initial language for the DVD disc menu.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 99.)
• AUDIO LANGUAGE:
Select the initial language for audio sound language.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 99.)
• SUBTITLE:
Select the initial language for subtitles.
Selectable languages—ENGLISH, SPANISH, FRENCH,
CHINESE, GERMAN, ITALIAN, JAPANESE, AA – ZU
(Language code: See page 99.)
• ON SCREEN LANGUAGE:
Select the language for the on-screen menus and
indications.
Selectable languages—ENGLISH,
(Chinese),
ESPAÑOL (Spanish)
The original language will be selected as the initial
language regardless of your setting in the following
case:
– If the language you have selected is not recorded on the disc.
– If the disc is programed to be played back in the original
language.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
CHINESE
CHINESE
CHINESE
ENGLISH
PRESS KEY
EXIT
Changing the Various Audio Settings
On the AUDIO menu, you can change the following sound
settings.
• DIGITAL AUDIO OUTPUT:
Set the output signal type through the DVD OPTICAL
DIGITAL OUTPUT terminal. (See also page 16.)
– Select “STREAM/PCM” when connecting an
amplifier or a decoder compatible with Dolby Digital,
DTS*, and MPEG Multichannel.
– Select “PCM ONLY” when connecting an amplifier
compatible only with Linear PCM, or a digital
recording device such an MD recorder, DAT deck, etc.
– Select “DOLBY DIGITAL/PCM” when connecting
an amplifier or a decoder compatible only with Dolby
Digital.
* This unit does not have the DTS decoding function.
To listen to DTS encoded sound, connect a DTS decoder
or a DTS compatible amplifier.
• DOWN MIX:
When playing a DVD whose audio sound is recorded
with the multichannel surround, this unit properly
converts the sound signals into 2-channels.
Set this item according to your audio system.
– Select “Lt/Rt” when connecting an amplifier with the
surround decoder.
– Select “Lo/Ro” when listening to the playback sound
through the speaker connected to this unit or when
recording on this unit.
Also select “Lo/Ro” when connecting an amplifier
without the surround decoder or a digital recording
device.
More about DOWN MIX
• The DOWN MIX function does not work when the 3D
PHONIC function is activated. (See page 55.)
• The DOWN MIX setting does not affect DTS signals.
DIGITAL AUDIO OUTPUT
DOWN MIX
COMPRESSION
STREAM/PCM
Lo / Ro
OFF
PRESS KEY
EXIT
EN83_87UX-A10DVD[UB].pm6 02.10.7, 8:12 AM 85