JVC UX-A10DVD - Manual (Page 77)

74
English 4
Press GROUP SKIP ¢ or GROUP SKIP 4
while holding down SHIFT to select the group you
want to erase.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat
from step 4.
6
Press ENTER.
“EDITING” appears in the main display for a while,
then “WRITING” and the MD REC indicator flashes
while the changes you have made are recorded on the
MD.
Erasing Tracks in a Group—ERASE GR
This function allows you to erase a group together with
tracks in the group.
You cannot recover the tracks in the erased group.
Once a group is erased, the other tracks and groups are
renumbered.
• To stop any time during the editing process before step 6,
press MD GROUP TITLE/EDIT.
On the remote control ONLY:
In the following example, the process is explained from the
very beginning—that is, inserting a disc. You can also edit
an MD during playback (in normal play mode).
1
Insert an MD you want to edit into the MD loading
slot.
2
Press MD GROUP TITLE/EDIT repeatedly until
“ERASE GR ?” appears in the main display.
• If you want to stop this editing process, press
CANCEL.
3
Press SET.
• If the loaded MD has no groups, you cannot go on to
the following steps.
• During playback:
The group number of the currently playing track will
appear. If the track does not belong to any group, the
group number will be indicated by “– –.”
Ex.: When group 6 is selected.
Group No.
EN65_74UX-A10DVD[UB].pm6 02.10.7, 8:11 AM 74