JVC SR-VS10U - Manual (Page 12)

12
EN
INITIAL SETTINGS (cont.)
SET TIME
5
Press CH 5∞ or %fi until
the desired time appears,
then press OK or
#
.
● Press and hold CH 5∞
or %fi to change the
time by 30-minute
increments.
● When the time is
entered manually, "AUTO CLOCK" will be automati-
cally set to "OFF", and "HOST CH" and "TIME ZONE"
will disappear.
SET DATE
6
Press CH 5∞ or %fi until the desired date appears,
then press OK or
#
.
● Press and hold CH 5∞ or %fi to change the date by
15-day increments.
SET YEAR
7
Press CH 5∞ or %fi until the desired year appears, then
press OK or
#
twice.
SELECT D.S.T. MODE
8
Press CH 5∞ or %fi to select the desired mode.
a– Set to "ON" so that the adjustment to your VCR's
clock will be made on the clock itself.
b– Set to "OFF" if Daylight Saving Time does not apply
to you.
START CLOCK
9
Press MENU and normal screen appears.
Manual
To Make Corrections
Press OK or
#
until the item you want to change blinks, then
press CH 5∞ or %fi.
SELECT TIME ZONE
8
You can select the time zone automatically or manually.
Move the highlight bar to "TIME ZONE" by pressing OK
or
#
, then press CH 5∞ or %fi to select "AUTO" or the
desired time zone.
AUTO ATLANTIC
HAWAII EASTERN
ALASKA CENTRAL
PACIFIC MOUNTAIN
NOTE:
If an incorrect time is displayed by the Plug & Play
function, you may be receiving the clock setting data of
a PBS channel from an adjacent time zone or from an
incorrect PBS channel from a cable TV system. If you
selected "AUTO" for the host channel in step 6, be sure
to select the correct time zone manually.
RETURN TO NORMAL
SCREEN
9
Press MENU.
IMPORTANT
Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel
when the clock is being set. The current time will appear
automatically when the clock is set.
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 00
AUTO CLOCK : ON
HOST CH
: AUTO (CATV)
D.S.T. : AUTO
TIME ZONE : AUTO
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END