JVC SR-VS10U - Manual (Page 19)

EN
19
Set DBS Receiver Output
Channel & DBS Receiver
Brand
TURN ON DBS RECEIVER
1
Select a channel other than channel 55, 100 or 205 on
your DBS receiver.
TURN ON THE VCR
2
Press POWER.
● Set the VCR to the channel (3 or 4 or L-2 or L-1) on
which the signals from the DBS receiver are received.
ACCESS MAIN MENU
SCREEN
3
Press MENU.
ACCESS INITIAL SET
SCREEN
4
Press CH 5∞ or %fi to move the highlight bar (arrow)
to “INITIAL SET”, then press OK or
#
.
ACCESS DBS RECEIVER SET
SCREEN
5
Press CH 5∞ or %fi to
move the highlight bar
(arrow) to “DBS RECEIVER
SET”, then press OK or
#
.
SELECT DBS RECEIVER
OUTPUT CHANNEL
6
Your selection depends on
how your DBS receiver is
connected to your VCR.
If your DBS receiver is
connected to your VCR
using an RF connection . . .
. . . press CH 5∞ or %fi
until the channel number
representing the DBS receiver's output (CH3 – CH4)
appears on the screen.
If your DBS receiver is connected to your VCR’s REAR
AUDIO/VIDEO IN connectors . . .
. . . press CH 5∞ or %fi until "ON L-1 (REAR)" appears
on the screen.
INITIAL SET
CLOCK SET
LANGUAGE
ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
=DBS RECEIVER SET
SELECT WITH ( 5,∞) AND (OK)
PRESS (MENU) TO END
DBS RECEIVER SET
OFF
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV VHS
POWER
POWER
CONTINUED ON NEXT PAGE
Turn on the TV and select the AV mode.
CH
MENU
OK