Access main menu screen, Access vhs mode set screen, Select s-vhs mode – JVC SR-VS10U User Manual
Page 38: Return to normal screen, Playback and recording features (cont.), S-vhs (super vhs), s-vhs et and vhs
38
EN
3
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar (arrow) to "VHS MODE SET" by
pressing CH
5∞ or%fi, then press OK or
#
.
SELECT S-VHS MODE
3
Move the highlight bar
(arrow) to "S-VHS MODE"
by pressing CH
5∞ or%fi,
then press OK or
#
to set to
"ON" or "OFF".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTE:
When playing back a tape that has been recorded in S-VHS or
S-VHS ET, the S-VHS indicator lights on the display panel
regardless of the "S-VHS MODE" setting.
S-VHS (Super VHS), S-VHS
ET and VHS
(VHS deck only)
Your VCR can record in S-VHS, S-VHS ET or VHS.
S-VHS allows you to make high quality video recordings with a
horizontal resolution of 400 lines. This compares with the 240
lines of resolution of normal VHS recordings. To achieve the
highest quality picture we recommend that you record in S-VHS
mode.
By using S-VHS ET it is possible to record and play back with S-
VHS picture quality on VHS cassettes with this VCR. For details,
refer to page 39.
To record in S-VHS;
● perform the steps 1 – 4 below to set the "S-VHS MODE" to
"ON".
● then, insert a cassette marked "S-VHS", the S-VHS indicator
will light on the display panel.
The S-VHS recording mode will be automatically selected.
To record in S-VHS ET on a VHS high grade cassette;
● press S-VHS ET and set to "ON".
੬
"Super VHS ET" on page 39.
To record in VHS;
● insert a cassette marked "VHS".
● press S-VHS ET and set to "OFF".
The VHS recording mode will be automatically selected
regardless of the S-VHS mode setting.
To record in VHS on an S-VHS cassette;
● insert the cassette marked "S-VHS", the S-VHS indicator will
light on the display panel.
● then, perform the steps 1 – 4 below to set the "S-VHS MODE"
to "OFF"; the S-VHS indicator will go out.
The VHS recording mode will be selected.
NOTE:
Tapes recorded in S-VHS or S-VHS ET mode can not be played
back successfully on normal VHS VCRs.
CH
MENU
OK
VHS MODE SET
S-VHS ET
OFF
= S-VHS MODE
ON
VIDEO CALIBRATION
ON
PICTURE CONTROL
AUTO
DIGITAL TBC/NR
ON
VIDEO STABILIZER
OFF
NEXT PAGE
SELECT WITH (
5,∞) AND (OK)
PRESS (MENU) TO END
PLAYBACK AND RECORDING FEATURES (cont.)