Connections, Check contents, Situate vcr – JVC SR-VS10U User Manual
Page 6: Connect vcr to tv, Connect vcr to power source, Final preparation for use, Installing your new vcr, Basic connections
6
EN
ANT. IN
AC IN
AUDIO
VIDEO
DV PLAYBACK
COMPONENT
VIDEO OUT
R
R
L
L
IN
OUT1
OUT2
CABLE
BOX
S VIDEO OUT
1
S VIDEO IN
2
Y
Pb
Pr
INSTALLING YOUR NEW VCR
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” (
੬
pg. 79).
SITUATE VCR
2
Place the VCR on a stable, horizontal surface.
CONNECT VCR TO TV
3
The connection method you use depends on the type of
TV you have.
a– Disconnect the TV antenna from the TV.
b– Connect the TV antenna cable to the ANT. IN jack
on the rear of the VCR.
c– Connect an Audio/Video Cable between the AUDIO
OUT and VIDEO OUT jacks on the rear of the VCR
and the AV IN jacks on the TV. Set your TV in video
input mode or A/V input mode. Refer to the TV
Instruction Manual.
S-VIDEO Connection
●
If you have a TV with S-VIDEO input terminals, see
"S-VIDEO Connection" on page 7.
Component Video Connection
●
If you have a TV with component video input
terminals, see "Component Video Connection" on
page 7.
CONNECT VCR TO
POWER SOURCE
4
Connect the provided AC power cord to the AC power
inlet on the rear of the VCR first, then to an AC outlet.
● The clock and tuner channels will automatically be
set when the antenna is connected and when the AC
is first connected to the VCR (
੬
pg. 8).
(If "Auto" or "CH" is displayed on the front display
panel before the VCR is powered on, the clock and
tuner channels are being set automatically. Wait for
the time to be displayed on the front display panel
before powering on the VCR.)
FINAL PREPARATION FOR
USE
5
Power on the VCR.
You can now perform simple playback (
੬
pg. 21) or
simple recording (
੬
pg. 22).
NOTES:
●
For full identification of the VCR's rear panel, refer to the
Index (REAR VIEW
੬
pg. 75).
●
It is not possible to view a TV program through the VCR by
the ordinary RF connection.
Connections
Antenna or Cable
Flat Feeder
Coaxial Cable
Back of VCR
AC Outlet
TV
Matching Transformer
(not supplied)
Audio/Video
Cable (supplied)
ANT. IN
(Antenna or
Cable input)
Basic Connections
AUDIO
OUT
VIDEO
OUT
AC power
inlet