JVC SR-VS10U - Manual (Page 29)

EN
29
Select The Soundtrack
(VHS deck)
The VHS deck can record two soundtracks simultaneously
(Normal and Hi-Fi) and play back the selected one, or both
together. Or, when viewing a pre-recorded tape that contains
two separate Hi-Fi audio programs, you can choose to listen to
either one by selecting either "Hi-Fi L" or "Hi-Fi R".
NOTE:
If the tape being played back has no Hi-Fi soundtrack, the
Normal soundtrack will be heard no matter what choice you
make.
You can select the soundtrack by simply pressing the
remote control's A. MONITOR button as follows:
Hi-Fi
→
Hi-Fi L
→
Hi-Fi R
→
Normal
→
Mix
→
Hi-Fi
Video Stabilizer
(VHS deck only)
By activating the Video Stabilizer you can correct vertical
vibrations in the picture when playing back unstable EP
recordings that were made on another VCR. When this function
is set to "ON", vertical vibration will be automatically corrected.
*The default setting is "OFF".
ACCESS MAIN MENU
SCREEN
1
Press MENU.
ACCESS VHS MODE SET
SCREEN
2
Move the highlight bar
(arrow) to "VHS MODE
SET" by pressing CH
5∞ or
%fi, then press OK or #
.
ACTIVATE VIDEO STABILIZER
3
Move the highlight bar
(arrow) to "VIDEO
STABILIZER" by pressing
CH
5∞ or %fi, then press
OK or
#
to set to "ON".
RETURN TO NORMAL
SCREEN
4
Press MENU.
NOTES:
● When you finish viewing the tape, be sure to set it back to
"OFF".
● Regardless of the setting, this function has no effect during
recording and during special-effects playback.
● The Superimpose mode indications may jitter vertically when
"VIDEO STABILIZER" is set to "ON".
● To watch recordings with close-caption, it is necessary to set
the Video Stabilizer function to "OFF".
MAIN MENU
MODE SET
=VHS MODE SET
DV MODE SET
TUNER SET
INITIAL SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END
VHS MODE SET
S-VHS ET OFF
S-VHS MODE ON
VIDEO CALIBRATION ON
PICTURE CONTROL AUTO
DIGITAL TBC/NR ON
= VIDEO STABILIZER ON
NEXT PAGE
SELECT WITH ( 5,∞) AND (OK)
PRESS (MENU) TO END