JAI TM-2016-8/8CL - Manual (Page 15)

Page 5
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Installation
2 Installation
The following instructions are provided to help you to set up your camera quickly and easily. We
suggest that you read through these instructions before you unpack and set up your camera system.
2.1 Getting Started
2.1.1 Unpacking Instructions
We recommend that you save the original packing cartons for the cameras and accessories in case you
need to return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field
installation to assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List shown below to assure that you have
received everything as ordered, and that nothing has been overlooked in the packing materials. If any
item is missing, please contact your JAI, Inc. representative immediately.
• TM-2016-8 camera
• TM-2016-8 data sheet
• TM-2016-8 operation manual (if ordered)
2.1.3 Accessories and Options
Following is a list of additional accessories and options that may be required for your application.
Please check with your JAI, Inc. representative before you install your camera to determine what you
might need.
• Digital output cable 30DG-02 (TM-2016-8 standard model)
• Serial Communication Kit CS-232E
• PD-12UUP series power supply
• 12P-02S power cable
• 26CL-02-26 Camera Link cable (for TM-2016-8CL camera)
2.2 Camera Setup
2.2.1 Heat Dissipation
The TM-2016-8 camera from JAI, Inc., is a compact 2K by 1K camera. Since all the electronics have
been packed in a compact package, the outer case of the camera gets hot due to heat dissipation. For
optimal performance, JAI, Inc. recommends using a cooling fan to set up a positive air flow around the
camera and following the precautions below.
• Mount the camera on a large heat sink (camera bracket) made out of conductive material like alu-
minum.