JAI TM-2016-8/8CL - Manual (Page 26)

Page 16
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Operation
the RS-232 interface will over-write the rear panel switch settings of the camera. The table below shows
details on various modes.
3.2 Camera Link Rear Panel (TM-2016-8CL)
3.2.1 Digital Output Connector
Refer to Section 2.2.2 (d on page 8 for information on digital output connectors.
TABLE 6. Mode Selection Switch
Mode
Selection
Switch
Position Mode Information Up/Down Switch Functions
0 Normal Mode Display Mode (D)
1 Set Gain Up/Down Change gain
2 Set Vtop (A/D) Up/Down Change A/D ref. top
3 Set Vbottom(A/D) Up/Down Change A/D ref. bottom
4 Gain Selection #1 Up: 9dB, Down: 12dB Lower gain selection
5 Gain Selection #2 Up: 18dB, Down: 22dB Higher gain selection
6 Linear LUT Up: Linear, Down: LUT Linear/LUT selection
7 Knee Selection Up/Down (Scroll) Scroll 10 different LUTs
8 Async Reset Mode Up: Normal,
Down: Async
Async and normal shutter
9 Factory default Recall Up/Down: Recall Factory setting
A Power up Setting Up: Recall, Down: Save Power up page setting
B User Page Storage #1 Up: Recall, Down: Save User page storage setting
C User Page Storage #2 Up: Recall, Down: Save User page storage setting
D Direct Shutter Control Up/Down Shutter speed increment
by 1H
E Scan Format2 Up: Optional,
Down: Binning
Two-row binning
selection
F Scan Format1 Up: Normal,
Down: Normal
Custom option scanning
CAMERA LINK
POWER BNC