2 (b) 12-pin connector (camera link models), Table 2. 12-pin connector (tm-2016-8cl), 2 (c) digital output connector – JAI TM-2016-8/8CL User Manual
Page 17: Figure 3. rear panel view of digital connector, Figure 3, Rear panel view of digital connector, Table 2, Pin connector (tm-2016-8cl)
Page 7
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Installation
2.2.2 (b) 12-Pin Connector (Camera Link models)
The TM-2016-8 Camera Link cameras have a 12-pin Hirose connector for power input and signal I/O.
Pin #1 is Ground and pin #2 is +12V DC. The pinout table is shown below. For TM-2016-8 Camera
Link model cameras, serial communication camera control is done via the MDR26 Camera Link
connector on the rear panel of the camera.
2.2.2 (c) Digital Output Connector
The TM-2016-8 has a 31-pin AirBorn connector (MP211-031-113-4300) on the rear panel to output 8-
bit, RS-644 video data. The connector pin-out is shown in the figure below.
FIGURE 3.
Rear Panel View of Digital Connector
Note: CLK: data clock, LDV: Line Data Valid, FDV: Frame Data Valid, INTEG: Integration
control, EXT CLK: external pixel clock, []: Differential input option.
TABLE 2.
12-Pin Connector (TM-2016-8CL)
Pin
Description
Pin
Description
1
GND
7
VD in
2
+12V DC
8
N/C
3
GND (analog)
9
HD in
4
Video out
10
N/C
5
GND (digital)
11
Integration Control
6
VINIT in
12
N/C
1
17
31
16