JAI TM-2016-8/8CL - Manual (Page 33)

Page 23
TM-2016-8 and TM-2016-8CL Progressive Scan Shutter Camera
Operation
FIGURE 7. Look-Up Table
3.8 Scan Modes
The TM-2016-8 supports the following scan modes:
3.8.1 Full Progressive Scan
Normal scanning mode the TM-2016-8 is for 1920 x 1080 pixels. The standard speed with single-
channel output is 8 frame/sec at the pixel clock of 20 MHz. The progressive scan reads every line from
top to bottom and all lines are obtained per image capturing with electronic shutter.
3.8.2 Two-Row Binning
This is a standard feature in the TM-2016-8. The camera scans two rows together and outputs 1920 (H)
x 540 (V) pixels at 16 frames per second. Two-row binning is typically implemented to increase speed
and to display real-time images on multi-sync monitors.
3.9 External Sync and Pixel Locking
The TM-2016-8 accepts an external sync of standard HD and VD at TTL level for general locking to a
system sync and clock. The external sync is only available for 8-frame mode and the frequency
requirement is as follows:
fHD = 9.09 KHz ±5%
fVD = 8.00 Hz ± 5%
(Internal Master clock = 40.00 MHz,
Pixel clock = 20.00 MHz)
256
224
192
160
128
96
64
32
0
128 256 384 512 640 768 896 1024
Knee
Table
0
1
2
3
4
5
6
7
LUT #7
LUT #3
LUT #5
LUT #4
LUT #6
LUT #0
Left Knee
(X1, Y1)
84 224
56 224
80 160
60 160
40 160
96 192
48 192
112 224 Right Knee
(X2, Y2)
1024 256
1024 256
1024 256
1024 256
1024 256
1024 256
1024 256
1024 256
LUT #1
LUT #2