Silvercrest WAKE-UP LIGHT KH 2600 - Manual (Page 17)

15
Handling and operation
KH 2600
GB
IE
Adjusting the volume
Prerequisite: The device is switched on.
Press the ¡ button 6 or button 7 on the device or on the remote
control to adjust the volume. The set volume level is shown below and to the
right in the display
4 .
NOTICE
The set volume applies for all functions. ►
The volume you have selected will also be saved automatically as the ►
volume for the wake function.
Radio operation
NOTICE
For a good radio reception the wire antenna ► 24 must be completely un-
coiled. Adjust the antenna, whilst in radio operation, to the best reception.
Switching on the radio
Press the ¡ /ALARM OFF button 20 or the
button on the remote control to switch the
device on.
Press the FUNC. button ¡ 12 several times to
select the radio function. In the display 4
appears the symbol and the current recep-
tion frequency of the set station.
Manual station selection
Press the ►►I button ¡ 11 or I◄◄ button 13 briefly to set the frequency of the
desired station gradually with each button press.
Automatic station search
Press and hold down the ►►I button ¡ 11 or I◄◄ button 13 for at least two
seconds. The device automatically searches for the nearest station with
sufficient reception quality.
NOTICE
If the reception quality is especially high, in the display ► 4 appears the
stereo symbol .