Handling and operation – Silvercrest WAKE-UP LIGHT KH 2600 User Manual
Page 18
16
Handling and operation
KH 2600
GB
IE
Saving stations manually
The device has 20 memory slots available for station frequencies. To save a
station frequency proceed as follows:
Press the
¡
/ALARM OFF button
20
or the
button on the remote control
to switch the device on.
Press the FUNC. button
¡
12
several times to select the radio function.
Select a station with the ►►I button
¡
11
or the I◄◄ button
13
.
Press the MEMORY/TIME
¡
button
17
or the
MEM button on the remote control. "MEMORY"
appears in the display
4
and "01" blinks.
Press the A
¡
LARM1/ALARM2 button or the
MEM-/MEM+ button on the remote control
to select the desired memory slot between 01
and 20.
Press the MEMORY/TIME
¡
button
17
or the
MEM button on the remote control again to
save the reception frequency of the set station
to the selected memory slot.
NOTICE
If no input is made within approx. 5 seconds after the MEMORY/TIME
►
button or the MEM button on the remote control is pressed the "MEMORY
01" indicator in the display goes out and the current station is not saved.
Selecting a saved radio station
Press the
¡
/ALARM OFF button
20
or the
button on the remote control to switch the
device on.
Press the FUNC. button
¡
12
several times to
select the radio function.
Select with the A
¡
LARM1/ALARM2 buttons or
the MEM-/MEM+ buttons on the remote control
the desired memory slot for the saved station
between 01 and 20.