State Industries FANUC GFK-0827 - Manual (Page 4)

Preface
iv Hot Standby CPU Redundancy User’s Manual - December 1993 GFK-0827
Series 90-70 PLC Reference Manual (GFK-0265). Reference manual which describes
operation, fault handling, and Logicmaster 90-70 programming instructions for the
Series 90-70 PLC.
Series 90-70 Remote I/O Scanner User’s Manual (GFK-0579). Reference manual for the
Remote I/O Scanner, which interfaces a drop containing Series 90-70 modules to a
Genius bus. Any CPU capable of controlling the bus can be used as the host. This book
describes the Remote I/O Scanner features, configuration, and operation.
Series 90-70 Bus Controller User’s Manual (GFK-0398). Reference manual for the bus
controller, which interfaces a Genius bus to a Series 90-70 PLC. This manual describes
the installation and operation of the Bus Controller. It also contains the programming
information needed to interface Genius I/O devices to a Series 90-70 PLC.
We Welcome Your Comments and Suggestions
At GE Fanuc automation, we strive to produce quality technical documentation. After
you have used this manual, please take a few moments to complete and return the
Reader ’s Comment Card located on the next page.
Henry A. Konat
Senior Technical Writer