State Industries FANUC GFK-0827 User Manual

Page 52

Advertising
background image

3

41

GFK-0827

Chapter 3 Configuration

To display the RCM catalog list, press the rcm softkey (F3). The RCM catalog list is then
displayed as shown below.

Next, press the Enter key, the following screen is displayed to confirm that you have
selected the RCM catalog entry.

You have just configured the Local RCM in rack 0. The system automatically configures
the RCM in the Secondary unit as being in slot 1 of rack 7 (in relation to the RCM you
have just configured in the Primary unit).

Advertising