SATO MB400I - Manual (Page 26)

Reference
14
51
Reference
14
50
Item
Character magnification
Character rotation
Fonts
Barcode
2-D code
Switch
Display
Buzzer
Safety or Noise standard
Protective circuit
Water resistance
Environment conditions
(including battery pack)
Options
MB400i MB410i
1 to 6 times
0°, 90°, 180°, 270°
SATO standard fonts: Ч 20, Ч 21, Ч 22, Ч 23, Ч 24, OCR-A, OCR-B, POP fonts
Kanji 16 Ч 16, 22 Ч 22, 24 Ч 24 square Gothic (JIS level-1 and level-2 set),
Mark-down fonts
JAN/EAN8, JAN/EAN13, UPC-E/UPC-A, NW-7, CODE39, CODE93, CODE128,
INTERLEAVED 2 of 5, customer barcode, RSS-14
* However, barcodes are to be used at:
Parallel barcode: thin bar width 2 dots or more
Serial barcode: thin bar width 3 dots or more
PDF417, QR code (includes micro QR), Data matrix code (ECC200),
MAXI code, composite symbols
POWER button, PRINT button, FEED button
STATUS LED: 1 (lights in three colors: green, red, and orange)
Battery remaining power display LED : 3 (lights in two colors: green and red)
Printer status information buzzer
FCC15B, EN55022, EN55024, EN61000-3-2, EN61000-3-3, GB4943,
GB9254, GB17625.1
Overcharging prevention, over-discharging prevention, head overheating
protection function, low battery detection
Meets IPX3 JIS C0920-2003
When using waterproof case (option)
* Excludes when communication cable is connected.
Operating ambient temperature : -15 to 50°C (for wireless LAN: 0 to 50°C)
Humidity : 20 to 80% Non-condensing
Storage ambient temperature : -25 to 60°C
Humidity : 20 to 80% Non-condensing
Excludes paper environment
Battery pack, AC adapter, battery charger (single), waterproof case, belt
case, RS-232C cable, USB cable
Basic Specifications of MB400i/MB410i
Item
Printing method
Head density
Maximum effective printing area
Printing speed
Dimensions
Weight
Power source (battery)
Paper
Paper thickness
Paper shape
Label size (backing liner
and eye-mark pitch)
Label printing
Self-diagnosis function
Low power consumption
function
Interface
• RS-232C
• USB
• Optical coupling
• Bluetooth option
• Wireless LAN option
Paper sensor
MB400i MB410i
Thermal printing
8 dots/mm (203 dpi) 12 dots/mm (305 dpi)
104 mm (width) × 297 mm (pitch)
Maximum 103 mm/sec. (printing speed is 75 mm/sec. during dispenser
printing). Differs depending on printing rate and usage environment.
Printing speed can be changed using the printing speed setting command.
170 mm (width) × 76 mm (depth) × 134 mm (height) (excluding protruded parts)
750 g or less (Standard specifications; including the battery pack)
Pack type (lithium ion) 1700 mAh can continuously print four rolls of thermal labels
(equivalent to 50 m) when fully charged (however, at a printing rate of 16% or less).
Always use genuine SATO labels.
0.064 mm to 0.190 mm
Roll media: Face-out winding
Maximum outer diameter: φ 58 mm
Standard Width 50 to 111 mm (53 to 114 mm)
Pitch: 25 to 297 mm (28 to 300 mm)
Dispenser Width 50 to 111 mm (53 to 114 mm)
Pitch: 25 to 182 mm (28 to 185 mm)
Non-separated Width 53 to 107 mm
Pitch: 28 to 182 mm
Continuous printing (Paper sensor enabled)
Dispenser printing (Paper sensor enabled)
Journal printing (Paper sensor disabled)
Non-separated printing (Paper sensor enabled)
Label printing can be changed using the printer command <PG>.
Head check/battery check/paper out/cover open/test printing
Enters sleep mode after five seconds of non-activity (button press, data
reception or cover operation). Automatically powers off after five minutes of
continued non-activity. Note: The default setting for the Bluetooth or the
wireless LAN models is to disable automatic power-off.
The automatic power-off time can be changed using the <PG> printer
operation command. For command details, see the programming guide.
Mini DIN (specified)
mini B type
Infrared communication (compliant with IrDA Standard Ver 1.2)
Bluetooth Specification Ver1.1 Class2
Wireless LAN interface (IEEE 802.11b/g)
TCP/IP (FTP, LPR, SOCKET)
Reflective sensor (I-mark), transmission type (gap)