SATO MB400I - Manual (Page 4)

Safety Precautions
1
7
Safety Precautions
1
6
AC Adapter/Battery Charger (Option)
• Use only the specified voltage. Using a different voltage may create the danger of
fire or electric shock.
• Use only the specified AC adapter. Using a different one may create the danger of
fire or electric shock.
• Never use the battery charger with any other battery pack except for the specified
one. Doing so can rupture the battery, cause leakage, fire or electric shock.
• Never cut, damage or modify the power cord. Also, never place heavy objects on
the power cord or heat or pull the power cord. Doing so may damage the cord and
create the danger or fire or electric shock.
• Should the power cord ever become seriously damaged (internal wiring exposed or
shorted), contact your nearest dealer or service center for repair. Continued use of
such a cord creates the danger of fire or electric shock.
• Never modify, excessively bend, twist, or pull the power cord. Doing so creates the
danger of fire or electric shock.
Location
Do not locate the printer in the area subjected to high humidity or dew. If dew forms
inside the printer, immediately turn off the printer and do not use it until it has been
dried up. Continued use creates the danger of electric shock or the printer damage.
Power
• Do not use wet hands to operate the power switch, replace the battery pack or
unplug the AC adapter or battery charger. Doing so creates the danger of electric
shock.
• The AC adapter set provided for this printer is specific to this printer. Do not use it
for other electric equipment.
Thermal Head and Stepping Motor
• The thermal head gets very hot after printing. Take care when replacing the label or
cleaning the printer just after printing to avoid burns.
• Touching the end of the thermal head with bare hands may cause injury. Take care
when replacing the label or cleaning the printer to avoid injury.
• Do not try to replace the thermal head by yourself. Doing so creates the danger of
injury, burns, or electric shock.
Easy Cutter
This part contains a blade. Take care to avoid being injured by the blade and other
sharp parts in the printer.
Replacing the Battery Pack
• Use only the specified battery pack.
• When replacing the battery pack, make sure to install the pack in the correct
orientation. Incorrectly replacing the battery creates the danger of injury or damage
to surrounding areas, explosion is caused.
• Replacing a small-size rechargeable battery (Lithium ion battery)
Apply insulation treatment for the old battery pack by sealing the contact with tape
or the like and ask our sales representative or service center for the measures to be
taken to recycle the reusable materials.
Do not place the battery pack together with other batteries such as dry batteries.
Leaving the printer unused for a long time
If you have no plan to use the printer for a long time, remove the battery pack from
the printer and unplug the AC adapter from the wall outlet.
Maintenance and Cleaning
For safe maintenance or cleaning of the printer, make sure to remove the battery
pack and the AC adapter from the printer.
Caution Warning