Appendix g: hard disk installation – Speco Technologies DVR-16TT User Manual
Page 128
Advertising
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
127
Appendix G: Hard Disk Installation
The following steps describe how to install HDD(s) to your DVR-4TN/8TN/16TN/16TS/16TT
unit.
Step 1: Disconnect power from the unit. Remove the 8 screws that hold the top cover
in place(3 on each side, 2 in the rear).Remove the top cover by sliding it to
the rear.
Figure 1: External appearance of DVR-4TN/8TN/16TN/16TS/16TT
Figure 2: Internal construction of DVR-4TN/8TN/16TN/16TS/16TT
Figure 3: Remove screws from the bracket
Advertising