Speco Technologies DVR-16TT - Manual (Page 49)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
48
4.6.5 Setting Preset Points
The DVR-4TN/8TN/16TN/16TS/16TT series unit allows user to set preset
positions; the amount of preset points allowed depends on the dome
manufacturer.
Follow these steps to set preset points..
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter dome control mode.
• Use Direction keys to position the dome camera to desired position.
• Press 2 to view the dome control Hint Screen; press 2 again to toggle the
Hint Screen.
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
•
Press 1 to access the Set/Go Preset function. The Dome Preset menu is
then displayed.
Dome Preset
Index
1
2
3
4
5
6
7
8
9
Set Preset
NO
NO
NO
NO
NO
NO
NO
NO
NO
Go Preset
NO
NO
NO
NO
NO
NO
NO
NO
NO
• Use UP / DOWN keys to select the desired preset number from the menu.
• Change the <Set Preset> of the selected preset number to <YES>, and
press ENTER to save the position. Now the preset is set and ready to call.