Speco Technologies DVR-16TT - Manual (Page 24)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 23
3.3 Power Up / Down the Unit
If you must shut down the DVR-4TN/8TN/16TN/16TS/16TT series unit for any
reason, use the proper shut down and power up procedures to avoid damage
to your DVR unit..
To Power Up the Unit
First check the type of power source available is compatible before plugging
in your DVR and turn on the unit using the power switch on the rear panel.
The color bar and system checking information will be shown on the monitor
and disappear when the unit has been completely powered up.
To Restart / Shutdown the Unit
Press MENU and input the administrator password to access the OSD Main
menu. Select <Shutdown> in Main Menu and press ENTER to enter the
Shutdown menu, which displays as follows.
Shutdown
1. Power Off
2. Reboot Execute
Execute
<Power Off>
Select this item to shut down the unit. Do not disconnect the power during
shut down until the message “You can safely turn off DVR now!” displays.
<Reboot>
Select this item to reboot the unit. The color bar and system checking
information are displayed on the monitor until the unit is completely restarted.