Speco Technologies DVR-16TT - Manual (Page 18)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 17
Camera Looping
Groups of BNC connectors are positioned on the rear panel for looping out
video input.
3. General System Setup
The DVR-4TN/8TN/16TN/16TS/16TT series DVR allows the user to easily
access some general operations through the front panel. The following
subsections introduce general operation of the unit.
The regularly displayed OSD information and its positions are shown in the
following figure. The channel title is displayed on the top-left side of the
window, either in full screen mode or in multiple channel mode. The current
operating mode, including Call mode, Dome-Control mode, Playback mode.
Freeze mode and Sequence mode, is displayed on the bottom-left side of the
screen. The date/ time information is displayed on the bottom-right side.
Ch4
Playback
2005/11/09 PM04:31:22
3.1 Front Panel Introduction
The unit’s front panel controls enable the user to control the unit and preset
programmable functions.