Speco Technologies DVR-16TT - Manual (Page 78)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 77
5.2.5 Screen Center Adjust
This item is used to adjust the screen center of the main monitor display area.
Follow these steps to set the center point.
• Select <Screen Center Adjust> from the Monitor Setup menu and press
ENTER. The adjusting screen displays as follows.
Screen Center Adjust
▲
◄ + ►
▼
• Position the screen center position using the Direction keys.
• Press ENTER to exit when finished.
5.2.6 Show Color Bar
Choose this item to display a color bar pattern on the screen. The color bar
helps to adjust the monitor hue, saturation, text color, and display options.
Press ESC to exit the color bar pattern and return to the OSD menu.
5.2.7 VGA Resolution
This item allows the user to select appropriate VGA resolution for the VGA
monitor connected to the unit. The options are <800×600> (default), <1024×
768> and <1280× 1024>.
NOTE: If the selected VGA resolution is too high for the monitor, the
message “No Signal’’ will be shown on screen. Then please press ESC
on the front panel to restore the original setting.