Preparation preparación – Samsung D365W(I) User Manual

Page 15

Advertising
background image

ENGLISH

ESPAÑOL

15

15

Preparation

Preparación

Lithium Battery Installation

Instalación de la pila de litio

Lithium Battery Installation for the
Internal Clock

1. Remove the Battery Pack from the rear of

the Camcorder.

2. Open the Lithium Battery Cover on the rear

of the Camcorder.

3. Position the Lithium Battery in the Lithium

Battery Holder, with the positive (

)

terminal face up.
Be careful not to reverse the polarity of the Battery.

4. Close the Lithium Battery Cover.

Lithium Battery Installation for the
Remote Control (VP-D363(i)/
D364W(i)/D365W(i) only)

1. Pull out the Lithium Battery Holder toward the

direction of the arrow
using instruments such as a pair of tweezers.

2. Position the Lithium Battery in the Lithium

Battery Holder, with the positive (

) terminal face up.

3. Reinsert the Lithium Battery Holder.

Precaution regarding the Lithium Battery

1. The Lithium Battery maintains the clock function and preset contents

of the memory; even if the Battery Pack or AC Power adapter is
removed.

2. The Lithium Battery for the Camcorder lasts about 6 months under

normal operation from time of installation.

3. When the Lithium Battery becomes weak or dead, the date/time

indicator will display <00:00 1.JAN.2006> when you set the
<Date/Time> to <on>. When this occurs, replace the Lithium Battery
with a new one (type CR2025).

4. There is a danger of explosion if Battery is incorrectly replaced.

Replace only with the same or equivalent type.

Warning: Keep the Lithium Battery out of reach of children. Should

a battery be swallowed, consult a doctor immediately.

Instalación de la batería de litio
para el reloj interno

1. Retire la batería de la parte posterior de la

videocámara.

2. Abra la tapa de la batería de litio en la

parte posterior de la videocámara.

3. Coloque la batería de litio en su soporte,

con el terminal positivo (

) hacia arriba.

Tenga cuidado de no invertir la polaridad de la batería.

4. Cierre la tapa de la batería de litio.

Instalación de la batería de litio
para el control remoto (sólo VP-
D363(i)/D364W(i)/D365W(i))

1. Tire del soporte de la batería de litio hacia

la dirección de la flecha.

2. Coloque la batería de litio en su soporte,

con el terminal positivo (

) hacia arriba.

3. Vuelva a introducir el soporte de la batería

de litio.

Precauciones referentes a la batería de litio

1. La batería de litio hace funcionar el reloj y los preajustes de la memoria,

incluso aunque retire la batería principal o el adaptador de CA.

2. La batería de litio de la videocámara puede durar aproximadamente

6 meses en condiciones de funcionamiento normales desde el
momento de su instalación.

3. Cuando se debilite o se agote la batería de litio, el indicador de fecha

y hora mostrará <00:00 1.JAN.2006> cuando tenga definido
<Date/Time> (Fecha/Hora) en <On>. Cuando suceda, sustituya la
batería de litio por una nueva (tipo CR2025).

4. Existe peligro de explosión si la batería se coloca de forma incorrecta.

Cambie la pila sólo por una igual o de especificaciones equivalentes.

Advertencia: Mantenga la batería de litio fuera del alcance de los

niños. En caso de que alguien se tragara una por
accidente, avise inmediatamente a un médico.

MENU

CHG

QUICK
MENU

Advertising