Advanced recording grabación avanzada, English español – Samsung D365W(I) User Manual

Page 45

Advertising
background image

✤ The WindCut Plus function works in both <Camera> and <Player>

(Audio dubbing) modes.

➥page 19

✤ Use the WindCut Plus when recording in windy places such as the

beach or near buildings.

✤ The WindCut Plus function minimizes wind noise or other noise while

recording.
- When the WindCut Plus is on, some low

pitched tones are eliminated along with the
sound of the wind.

1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].

(VP-D363(i)/D364W(i)/D365W(i) only)

3. Press the [MENU] button.
4. Move the [Zoom] lever up or down to select

<Record>, then press the [OK] button.

5. Move the [Zoom] lever up or down to select

<WindCut Plus>, then press the [OK] button.

6. To activate the WindCut Plus function, move the

[Zoom] lever up or down to select <On> or <Auto>
then press the [OK] button.

<On>: It removes the low pitched wind noise.

<Auto>: It minimizes the wind noise while
preserving the human voice.

7. To exit, press the [MENU] button.

WindCut Plus (<On>

or <Auto>

) icon

is displayed.

[ Notes ]

Make sure WindCut Plus is set to off when you want
the microphone to be as sensitive as possible.

WindCut Plus function is not available in USB
Streaming mode.
(VP-D362(i)/D363(i)/D364W(i)/D365W(i) only)

✤ La función WindCut Plus (Filtro viento) está operativa en los modos

<Camera> (Cámara) y <Player> (Modo Player) (Mezcla de audio).

➥pág. 19

✤ Utilice WindCut Plus (Filtro viento) cuando grabe en lugares con

viento como la playa o cerca de edificios.

✤ La función WindCut Plus (Filtro viento) minimiza el ruido del viento y

otros ruidos durante la grabación.

- Cuando Windcut plus (Filtro viento) está

activado, se eliminan algunos tonos de baja
frecuencia junto con el sonido del viento.

1. Coloque el interruptor [Power] en [CAMERA] o

[PLAYER].

2. Coloque el interruptor [Mode] en [TAPE].

(Sólo VP-D363(i)/D364W(i)/D365W(i))

3. Pulse el botón [MENU].
4. Mueva la palanca [Zoom] arriba o abajo para

seleccionar <Record> (Grabar) y pulse el
botón [OK].

5. Mueva la palanca [Zoom] arriba o abajo para

seleccionar <WindCut Plus> (Filtro viento) y
pulse el botón [OK].

6. Para activar la función WindCut Plus (Filtro viento),

mueva la palanca [Zoom] arriba o abajo para
seleccionar <On> o <Auto> y pulse el botón [OK].

<On>: elimina el ruido del viento de baja
frecuencia.

<Auto>: Minimiza el ruido del viento y conserva
las voces.

7. Para salir, pulse el botón [MENU].

Aparece el icono de WindCut Plus (Filtro viento)
(<On>

o

<Auto>).

[ Notas ]

Asegúrese de que la función Wind Cut Plus (Filtro
viento) esté desactivada cuando desee que la
sensibilidad del micrófono sea la mayor posible.

La función WindCut Plus (Filtro viento) no está
disponible en modo USB Streaming.
(Sólo VP-D362(i)/D363(i)/D364W(i)/D365W(i))

Advanced Recording

Grabación avanzada

Cutting Off Wind Noise (WindCut Plus)

Eliminación del ruido del viento (WindCut Plus (Filtro viento))

ENGLISH

ESPAÑOL

45

45

Move

Select

Exit

MENU

OK

ZOOM

Camera Mode

√Record

Rec Mode
Audio Mode
WindCut Plus
Real Stereo

√SP
√12Bit
√Off
√Off

Move

Select

Exit

MENU

OK

ZOOM

Off
On
Auto

4

6

60min

0:00:10

SP

STBY

7

œ

Camera Mode

Back

Rec Mode
Audio Mode

WindCut Plus

Real Stereo

Advertising