Sony CMT-DH7BT - Manual (Page 19)

CMT-DH7BT.GB.3-097-195-11(2)
1 GB
G
etting S
tar
ted
When using a TV
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in orange.
To
Press
Turn the TV on
or off
TV /  while
holding down
TV  .
Switch the TV’s
input source
between the TV
and other input
sources
TV/VIDEO 
while holding down
TV  .
Select the TV
channels
TV CH +/ 
or numeric
buttons  * while
holding down
TV  .
Adjust the
volume of the TV
speaker(s)
TV VOL +/ 
while holding down
TV  .
* For double digit number, hold down TV 
and press -/--  , then press the number.
(For example, hold down TV  ,
press -/--  , then 2 and 5 for entering 25.)
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /  to turn on the
system.
2
Press TIMER MENU  .
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the
display, press  or   repeatedly
to select “CLOCK SET?,” then press
ENTER  .
3
Press  or   repeatedly to set
the hour.
4
Press ENTER  .
The minute indication flashes in the
display.
5
Press  or   repeatedly to set
the minutes.
6
Press ENTER  .
The clock starts functioning.
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY  .
The clock is displayed for about
8 seconds.