Sony CMT-DH7BT - Manual (Page 38)

CMT-DH7BT.GB.3-097-195-11(2)
 GB
Specifying the slide show speed
(JPEG image files only)
1
Press DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
2
Press  or   repeatedly to select
(INTERVAL), then press
ENTER  .
The options for “INTERVAL” appear
on the TV screen.
3
Press  or   repeatedly to select
the transition interval you want.
The default setting is underlined.
 NORMAL: Sets the duration to
about 6 to 9 seconds (Images that
are 4,000,000 pixels or more will
lengthen the duration).
 FAST: Sets the duration shorter
than NORMAL.
 SLOW 1: Sets the duration longer
than NORMAL.
 SLOW 2: Sets the duration longer
than SLOW 1.
4
Press ENTER  .
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
Selecting a transition effect for image
files in the slide show
(JPEG image files only)
1
Press DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
2
Press  or   repeatedly to select
(EFFECT), then press
ENTER  .
The options for “EFFECT” appear on
the TV screen.
3
Press  or   repeatedly to select
the setting you want.
The default setting is underlined.
 MODE 1: The image sweeps in
from top to bottom of the screen.
 MODE 2: The image sweeps in
from left to right of the screen.
 MODE 3: The image stretches out
from the center of the screen.
 MODE 4: The images randomly
cycle through the effects.
 MODE 5: The next image slides
over the current image.
 OFF: Turns off this function.
4
Press ENTER  .
The selected setting takes effect.