Sony CMT-DH7BT - Manual (Page 67)

CMT-DH7BT.GB.3-097-195-11(2)
 GB
Additional I
nf
or
ma
tion
Continued

The timer does not function.
 Check the timer setting and set the
correct time (page 59).
 Cancel the Sleep Timer function
(page 59).
The remote does not function.
 Remove the obstacles between the
remote and the unit.
 Move the remote closer to the unit.
 Point the remote at the unit’s sensor.
 Replace the batteries (R6/size AA).
 Locate the unit away from the
fluorescent light.
There is acoustic feedback.
 Reduce the volume.
The color irregularity on a TV screen
persists.
 Turn off the TV set once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
THEATRE SYNC function does not
work.
 If distance between the TV and this
unit is too far, this function may not
work. Install the unit near the TV.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
 Place the speakers as symmetrically as
possible.
 Check that the speakers are connected
securely and correctly.
 The source being played back is
monaural.
Disc Player
The disc does not eject.
 Consult your nearest Sony dealer.
Playback does not start.
 Check whether a disc is loaded.
 Wipe the disc clean (page 75).
 Reinsert the disc.
 Insert the disc that this system can play
back (page 5).
 Insert the disc in the disc slot  with
the label side facing up.
 Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
 Press   (or DVD   on the
unit) to start playback.
 The region code on the DVD VIDEO
does not match the system.
 Cancel the Custom Parental Control
function (page 40).
The sound skips.
 Wipe the disc clean (page 75).
 Reinsert the disc.
 Move the unit to a place without
vibration (e.g., on top of a stable
stand).
 Move the speakers away from the
unit, or place them on separate stands.
When you listen to a track with bass
sounds at high volume, the speaker
vibration may cause the sound to skip.