Sony CMT-DH7BT - Manual (Page 28)

CMT-DH7BT.GB.3-097-195-11(2)
 GB
4
Press   .
The cursor moves to the track list “T”
(in this case, “01”).
To change a programmed step:
Press  or   repeatedly to select
the programmed step number you
want to change. Then, press   .
To delete a programmed step:
Press  or   repeatedly to select
the programmed step number
you want to change. Then, press
CLEAR  .
To delete all of the programmed
steps in the program list:
Press   to select “ALL CLEAR.”
Then, press ENTER  .
5
Select the track you want to
program.
For example, select track “02.”
Press  or   repeatedly to select
“02” under “T,” then press ENTER  .
Selected track
Total time of the programmed tracks
6
To program other tracks, repeat
steps 4 to 5.
7
Press   (or DVD   on
the unit).
Program Play starts.
When the Program Play ends, you
can restart the same program by
pressing   (or DVD   on
the unit).
To cancel Program Play
Press CLEAR  or select “OFF” in
step 3. To play back the same program
again, select “ON” in step 3 and press
ENTER  .
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
 When Program Play is activated, the
“REPEAT” setting is automatically changed
to “ON” if the current setting is “DISC” or
“TRACK.”
 You cannot perform Program Play with
VIDEO CDs during PBC playback.
Tip
The Program Play is canceled and the program
list is cleared when
 you eject the disc.
 you turn off the system.
 you change the function.