Sony CMT-DH7BT - Manual (Page 46)

CMT-DH7BT.GB.3-097-195-11(2)
 GB
BLACK LEVEL (COMPONENT OUT)
Select the black level (setup level)
for the video signals output from the
COMPONENT VIDEO OUT jacks.
You cannot select “BLACK LEVEL
(COMPONENT OUT)” when the system
outputs progressive signal.
OFF: Standard level
ON: Raise the standard black level. Use
this when the picture becomes too black.
: OUTPUT
)
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on left and right sides of the
image.
16:9 aspect ratio TV
1) The default setting varies depending on the
country or region.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
2) Depending on the DVD VIDEO, “4:3
LETTER BOX” may be selected automatically
instead of “4:3 PAN SCAN” or vice versa.
3) This setting is effective only when
 you set “TV TYPE” in “SCREEN SETUP”
to “16:9.”
 “P AUTO” or “P VIDEO” is selected
(page 18).
Setting playback options  CUSTOM
SETUP
Set up playback related and other
settings.
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: The picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: The picture, including subjects
that do not move dynamically, is output
in high resolution.