Sony CMT-DH7BT - Manual (Page 70)

CMT-DH7BT.GB.3-097-195-11(2)
0 GB
Picture
There is no picture.
 Press FUNCTION +/
 repeatedly
to select “DVD” (or press DVD  
on the unit).
 Check that the system is connected
securely.
 The video cord is damaged. Replace it
with a new one.
 Make sure you connect the unit to the
video input jack of your TV (page 17).
 Make sure you turn on the TV and
operate the TV correctly.
 Press PROGRESSIVE  on the unit
repeatedly to select “INTERLACE”
if you connect your TV to the unit’s
COMPONENT VIDEO OUT jacks
and your TV cannot accept progressive
signal.
 You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 18).
 Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 18).
 Make sure you select the video input
on the TV so that you can view the
pictures from the system.
 Make sure you connect the unit and
your TV using only the supplied video
cord.
Picture noise appears.
 Clean the disc.
 If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV’s S Video input (page 17).
 Keep the speaker cords away from the
antennas.
 When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based software
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.
The aspect ratio of the TV screen
cannot be changed even though you
can set “TV TYPE” under “SCREEN
SETUP” in the Setup Menu when you
play back a wide picture.
 The aspect ratio is fixed on your DVD
VIDEO.
 If you connect the unit with the S
Video cord, connect directly to the TV.
Otherwise, you may not change the
aspect ratio.
 Depending on the TV, you may not
change the aspect ratio.
Messages do not appear on the TV
screen in the language you want.
 Select the language you want for the
on-screen display in “OSD” under
“LANGUAGE SETUP” in the Setup
Menu (page 44).
The language for the sound track
cannot be changed.
 Multilingual tracks are not recorded on
the DVD VIDEO being played back.
 The DVD VIDEO prohibits changing
the language for the sound track.