Sealife DC100 - Manual (Page 22)

How to view image information and thumbnails
The TIME/DATE, image size and image number is also recorded at the same time the image is captured.
While in PLAY mode.
The Monitor ON/OFF button acts as a switch to cycle through image
information ON, thumbnail display and image information OFF.
1. Set the camera to PLAY mode.
2. Press the Monitor ON/OFF button to bring up the DATE/TIME, size and number of the image displayed.
3. Press the Monitor ON/OFF button again to show thumbnail images.
4. Use the arrow buttons ( ▲/▼) to quickly locate the image you are searching, and
then press the OK or Display button to preview it at full screen.
How to examine image details
Sometimes you may want the images to be enlarged on the LCD monitor to be carefully examined. While
in PLAY mode
,the OK button acts as a switch to cycle through 2X, 4X and 1X magnification.
1. Set the camera to PLAY mode.
2. Press the OK button once to magnify the image at 2X.
3. Press the OK button again to magnify the image at 4X.
4. Use the arrow buttons to navigate through the image magnified in a "Z" type sequence.
13
PIONEERmanREV 11/19/01 6:00 PM Page 13