How to adjust the white balance, How to set the osd (on-screen display) language – Sealife DC100 User Manual
Page 27
18
How to adjust the White Balance
To adjust the White Balance, perform the following:
1. Set the operating mode to RECORD.
2. Press the Menu button. The Record menu appears.
3. Select the WHITE BALANCE item using the arrow button (
▲/▼), then press OK button.
4. Select the desired white balance setting. Using the arrow button (
▲/▼), then press OK button.
• For information on white balance, see page 21.
This setting is reset to AUTO when the camera power is off.
How to set the OSD (On-Screen Display) language
To set the OSD language, perform the following:
1. Set the operating mode dial to LAND & SEA.
2. The Setup menu appears.
3. Select the LANGUAGE item. Using the arrow button (
▲/▼), then press OK button.
4. Select the desired language setting.
• For information on OSD language, see page 26.
The setting is conserved even if the camera power is off.
PIONEERmanREV 11/19/01 6:00 PM Page 18