Sealife DC100 - Manual (Page 45)

36
Operating Mode Dial
Switch the Operating Mode Dial to select the desired operating mode. There are five operating modes
available as follows:
RECORD: Capture/stores images
PLAY: Review images in memory
LAND & SEA Change camera settings and select between LAND & SEA exposure programs
DELETE: Delete images in memory
PC: Transfer images to PC
Battery Power Indicator
You may check the battery status by the battery power indicator on the LCD display.
Battery icon with 3 bars on: The battery is fully charged.
Battery icon with 2 bars on: The battery is partially charged (should be recharged before diving.)
Battery icon with 1 bar on: Insert new or freshly recharged batteries.
Battery icon with no bars on: The battery needs to be replaced, there is no battery power
remaining. The camera will be forced to power off at once.
• If “low battery” message will appears on LCD monitor, stop using camera and recharge
batteries.
PIONEERmanREV 11/19/01 6:00 PM Page 36