Sealife DC100 - Manual (Page 34)

LAND & SEA Mode
In LAND & SEA mode, users can customize the camera setting based
on your personal or picture taking requirements.
LAND & SEA Menu
Switch the Operating Mode dial to LAND & SEA, the Setup menu
appears.
The menu contains the following items: LAND, SEA / EXT. FLASH
This unique camera offers the option to set the exposure program for Land or Sea (underwater)
mode.
LAND - If using the camera above water, select the Land mode.
SEA - If using the camera underwater, inside the underwater housing, select the Sea mode.
EXT. FLASH - If using the camera underwater, inside the underwater housing with one or two external
flash(es). Select the External Flash mode.
1. Turn camera Power ON.
2. Set the operating mode dial to LAND & SEA. The set-up menu will appear.
3. Use the arrow ( ▲/▼)
button to move cursor next to “LAND/SEA/EXT FLASH”.
4. Press the OK button and the cursor will move to the data field at bottom of menu.
5. Use the arrow ( ▲/▼)
button to select between LAND, SEA or EXT FLASH mode and press OK
button.
6. Rotate operating mode dial to record to exit Set-up menu. You will see a fish icon appear
on the bottom of the LCD monitor when the camera is set to the Sea mode. A fish/flash will
appear when the camera is set to External Flash mode.
Sea mode should only be used for underwater pictures without the external flash. The Ext. Flash
mode should only be used for underwater pictures with one or two external flash(es).
25
PIONEERmanREV 11/19/01 6:00 PM Page 25