Sealife DC100 User Manual

Page 63

Advertising
background image

54

Battery Life

We have tested the following batteries under normal and extreme operating conditions. The following operating
times are averages and can vary depending on age of battery, temperature and other factors.
Normal conditions (designed to simulate operating conditions when scuba diving):
1. Turn camera on, take a test picture. Set to Sea Mode. Put in housing, close housing.
2. 90 minutes later: Turn power on. Take three pictures on land. 10 Minutes later: Take pictures underwater for 45

Minutes, not continuously, but every 2 Minutes, =23 pictures.

3. Wait for 1 hour, then take 20 underwater pictures in 40 Minutes.
4. Wait for 2 hours, then repeat step 2 and step 3.
5. Then repeat 3.
Extreme conditions (designed to test the power consumption in the most extreme operating conditions.)
1. Turn camera on, Set to External FLASH mode. Put in housing, close housing.
2. Take picture intervals as quickly as possible (display always ON, FLASH always fires)

Battery

Life during

Life during

Type

NORMAL dive use

EXTREME usage

SeaLife Ni-MH rechargeable (1600 mAh)

243 minutes

100 minutes

Energizer Lithium 1 (non-rechargeable)

400 minutes

130 minutes

Duracell Ultra (high-energy alkaline)

205 minutes

26 minutes

Duracell Coppertop (Standard alkaline)

20 minutes

10 minutes

Note: The above times may vary depending on other factors like temperature, humidity, age of batteries and other factors.

PIONEERmanREV 11/19/01 6:00 PM Page 54

Advertising
This manual is related to the following products: