Spectrum Brands Quad C6x VME64 - Manual (Page 30)

Monaco Technical Reference Spectrum Signal Processing
Processor Nodes
18 Part Number 500-00191
Revision 2.00
Pin assignments for the serial ports are given in the following tables.
Table 6 PEM Connections for Serial Port 0 and 1
Signal PEM 1 Port 0 PEM 2 Port 1*
CLKS External clock 56 17
CLKR Receive clock 52 13
CLKX Transmit clock 42 3
DR Received serial data 48 9
DX Transmitted serial data 46 7
FSR Receive frame synchronization 50 11
FSX Transmit frame synchronization 44 5
*The serial port routing jumper corresponding to the node (J7, J8, J9, or J10) must be
OUT for port 1 to be routed to the node’s PEM 2 connector.
Table 7 VME and PMC Connections for Serial Port 1
Node A (J7 IN) Node B (J8 IN) Node C (J9 IN) Node D (J10 IN)
Signal PMC JN5 VME-P2 PMC JN5 VME-P2 PMC JN5 VME-P2 PMC JN5 VME-P2
CLKS External clock 1 D-4 21 D-18 2 Z-3 22 Z-17
CLKR Receive clock 5 D-6 25 D-20 6 Z-5 26 Z-19
CLKX Transmit clock 9 D-8 29 D-22 10 Z-7 30 Z-21
DR Received serial data 11 D-10 31 D-24 12 Z-9 32 Z-23
DX Transmitted serial data 13 D-12 33 D-26 14 Z-11 34 Z-25
FSR Receive frame synchronization 15 D-14 35 D-28 16 Z-13 36 Z-27
FSX Transmit frame synchronization 17 D-16 37 D-30 18 Z-15 38 Z-29