Headset – Siemens HIPATH 1190 User Manual
Page 102
Step by step
Miscellaneous Functions
102
Headset
1
It is an accessory that can be installed on terminals to
replace the use of the handset and provide the user
with more comfort and with hand-free operation.
Models with electronic hook control (such as Siemens
Elipse 1.8 EHS and GN Netcom 9120) for answering
calls using a headset must use a 16 optiPoint Acoustic
Adapter, regardless of the optiPoint model used. opti-
Point Advanced features include a built-in headset inter-
face. However, an optiPoint Acoustic Adapter is re-
quired for connecting the headset. When an optiPoint
key is configured for using a headset (optional setting,
the system behaves as if a headset is connected.
Therefore, it is recommended that when you discon-
nect the headset you change the key configuration ac-
cordingly.
If you want to use a Siemens Elipse 1.8 EHS or GN Net-
com 9120 set without the electronic hook control
switch, you must use an optiPoint Acoustic Adapter for
optiPoint Entry, Basic and Standard models. For the op-
tiPoint Advanced, an optiPoint Acoustic Adapter is op-
tional. The headset can be connected to the built-in in-
terface on the telephone’s rear panel using a RJ45
connector. The Headset feature key must be pro-
grammed to answer calls.
Headset models without an electronic hook key (e.g.,
Plantronics) can be connected directly to the handset’s
interface on a optiPoint (Entry, Basic or Standard) tele-
phone, as well as through an optiPoint Acoustic Adapter
or the built-in interface (optiPoint Advanced only). How-
ever, in order to be detected by the system, a Headset
key must be programmed, regardless of the configura-
tion used.
[1] For installing and configuring a headset follow the instructions pro-
vided in its accompanying manual. For a view of the optiPoint rear
panel see ”Back panel: optiPoint 500”
The MUTE option must be enabled/disabled on the same equip-
ment.
If you have any questions, please contact your system’s Support
Technician.
When an optiPoint key is configured for using a
headset (optional setting, the system behaves as
if a headset is connected. Therefore, when you
disconnect the headset you must change the
key configuration accordingly.
oi.book Seite 102 Mittwoch, 16. August 2006 8:41 08