Siemens HIPATH 1190 - Manual (Page 58)

Step by step
Functions used for Receiving Calls
58
Conditional
1
Incoming calls can be forwarded to a specified destina-
tion, as configured in any TSP-type (TAPI Service Provid-
ers) application, such as Windows TAPI Browser: Previ-
ous list or Unconditional Call Forwarding settings will be
overwritten by the new list settings
.The following information is needed for configuring a
list:
• Incoming Caller ID
• Day of the week and time
• Type of call (internal or external)
When more than one number have been specified for
incoming calls to an extension, the call forwarding prior-
ity will be:
1. Checks to see if the Caller ID for the incoming call
matches the number programmed for the extension
2. Checks to ensure that the Type of Call (internal or ex-
ternal) has been configured
3. Checks the time settings.
Required: The extension has permission for conditional
Call Forwarding and the system is connected to a PC
that has a TAPI application installed.
1. Rules and conditions for Call Forwarding can be con-
figured for each extension by using a Windows TAPI
application
2. Apply the settings to the extension desired.
3. From this moment on extension will be forwarded.
The display shows that this feature is enabled.
[1] The system allows up to 50 Call Forwarding numbers (see Pro-
gramming Manual,Programming an Extension - Conditional For-
warding Limited by Extension and Permission for Conditional Call
Forwarding).
Conditional Call Forwarding has priority over an unconditional Call
Forwarding.
Conditional Call Forwarding cannot be used on a S
0
extension.
This feature is available when using a CTI (Com-
puter Telephony Integration) interface.
CFC ON
oi.book Seite 58 Mittwoch, 16. August 2006 8:41 08